loading
| Availability: | |
|---|---|
DESCRIPTION |

Overview
Our 20 inch Big Blue filter housing is a high-flow commercial pre-filter solution built for restaurants, coffee shops, hotels and F&B projects. With a rated flow of 3–5 T/H, this heavy-duty food-grade PP housing safeguards espresso machines, ice makers, steam boilers and kitchen water appliances. Unlike small filter housings or bulky central water purifiers, it balances high throughput, compact footprint and long service intervals, helping F&B operators cut downtime and control long-term operating costs.

Why Choose Our Big Blue Filter Housing?
Vs 10" Small Blue Housing
It delivers 3–4 times higher flow capacity. The filter cartridge lasts 6 months instead of just 1–2 months. Less frequent replacement keeps your business running smoothly without unexpected shutdowns.
Vs Central Water Purifier
It takes up much less space with a lower upfront investment. Simple maintenance and flexible parallel installation options fit kitchens with limited layout space.
Vs No Pre-filtration
Raw tap water directly causes scale buildup, pipe blockage and permanent damage to coffee machines, ice makers and boilers. Repair costs surge and equipment lifespan is drastically shortened.
Vs Disposable Filter Systems
You only replace the internal cartridge instead of the whole unit. Amortized 5-year cost is much lower, and it generates less plastic waste for greener operation.
☕ Boost Beverage & Ice Quality
This big blue filtration system upgrades your tap water for coffee, tea and ice production.
✅ Remove residual chlorine: Activated carbon cartridges eliminate chlorine odors, letting coffee and tea flavors come through cleanly.
✅ Anti-scale & water softening: Resin options reduce hard water scale, stabilizing extraction temperature for espresso and protecting boilers.
✅ Block sediment & particles: PP sediment cartridges trap sand, rust and debris to stop valve and nozzle clogging.
✅ Premium ice output: Filtered water produces clear, odor-free ice with better appearance and taste.
Typical Water Filtration Performance
| Parameter | Tap Water | After Big Blue Filtration | Removal Rate |
|---|---|---|---|
| TDS | 180–250 mg/L | 60–100 mg/L | ↓60% |
| Residual Chlorine | 0.4–0.8 mg/L | <0.05 mg/L | ≥90% |
| Hardness (as CaCO₃) | 120–200 mg/L | <50 mg/L | ≥70% |
| Turbidity | 2–5 NTU | <0.5 NTU | ≥90% |
| Odor & Taste | Chlorine smell | Fresh, clean | Significantly improved |
Cut Operation & Maintenance Expenses
Longer cartridge lifespan: PP cartridge for 6 months, carbon for 12 months, resin for 12–24 months. Planned replacement avoids emergency shutdown.
️ Extend equipment life: Pre-filtering reduces scale damage on boilers and evaporators, slashing repair costs by over 30%.
⚡ Save energy: Scale-free heat exchangers run more efficiently, bringing at least 15% power savings.
Simple maintenance: Tool-free opening design, easy cartridge swap and lower labor cost.
5-Year Cost Comparison (Medium Coffee Shop Reference)
The 20" Big Blue system brings a 58% total cost saving vs running without pre-filtration, and 46% saving compared with 10" small blue filter setups. A real 35-store coffee chain case proves: annual repair saving over $120,000, cartridge consumption down 40%, equipment failure rate cut 60%, and ROI within 1 year.
Core Specifications
Size: 20 inch Big Blue
Rated flow: 3–5 ton per hour
Max working pressure: 0.8MPa
Housing material: Food Grade PP, compliant with GB4806
Compatible cartridges: 20" BB PP sediment, GAC, CTO, resin cartridges
Target users: Coffee shop owners, F&B engineering contractors, hotel facility teams
Factory Support
We are direct manufacturer. Send us your local water test report, and our engineers provide free one-on-one water quality solution and customized filtration design for your commercial kitchen project.
ADVANTAGE |

✅ High Flow & Stable Pressure Performance
Delivers 3–5 T/H high flow rate for peak commercial water demand. Maintain steady pressure without obvious pressure drop, supporting continuous coffee extraction, ice making and multi-point water use at the same time. No water competition between your coffee machines, ice makers and kitchen faucets.
️ ✅ Leak-Proof & Pressure-Resistant Structure
The housing is integrally injection molded with food-grade PP, reinforced ribs improve impact resistance and anti-collision performance. The cap adopts PP+glass fiber reinforced material, which can withstand working pressure up to 0.8MPa. Double seal EPDM/silicone O-ring design provides reliable leak-proof protection. Diversion structure avoids short-circuit water flow for uniform filtration.
✅ Food Grade & Safe Material
All water contact parts comply with GB4806 food contact standard. Odorless, non-toxic and will not bring secondary pollution. Fully fit foodservice scenarios including cafes, restaurants and hotels.
⏱️ ✅ Long Service Life & Longer Cartridge Cycle
The filter housing itself can serve more than 5 years. Cartridge lasts 6 months or longer, much longer than the 1–2 month cycle of 10-inch small blue filter housings. Greatly reduce frequent replacement work and cut downtime risk.

✅ Flexible Installation & Simple Maintenance
Two installation options: wall-mounted bracket or floor stand. Multiple inlet & outlet modes: top-in bottom-out, left-in right-out to match different kitchen pipe layouts. Only 5 minutes for cartridge replacement in 4 simple steps with the matching wrench. Built-in air release valve reduces air pressure and prevents splashing when opening the housing. Multi-unit parallel design allows single filter replacement without shutting down the whole water system, your kitchen keeps running.
✅ Visible Filter Status for Easy Inspection
Transparent / white housing option lets you directly check the dirtiness of the internal cartridge. You only replace the cartridge when needed, no unnecessary disassembly.
✅ Professional System Matching Ability
Perfectly connects with water softeners, then supplies clean water to coffee machines, ice makers and drinking faucets. It solves the core pain points of scale clogging, equipment damage and unstable water quality in commercial kitchens.
✅ Complete After-sales Guarantee
1-year warranty for the housing, lifetime technical support. Free damage compensation for shipping defects. 24-hour fast response, 48-hour professional solution supply. Our engineers support filter selection, parallel system design and equipment connection guidance.
APPLICATION |

Typical Application Solutions
Our 20" Big Blue filter housing supports flexible cartridge combinations to build targeted filtration systems for different commercial F&B scenarios.
☕ Coffee Machine Pre-filtration Solution
Match PP sediment + carbon + resin softener cartridges. Effectively protect espresso boilers from scale buildup, stabilize water quality and greatly improve coffee extraction flavor. Perfect for coffee shops, roasters and espresso service suppliers.
Ice Maker Pre-filtration Solution
Combine PP sediment + CTO carbon cartridges. Block impurities and reduce chlorine, keep the ice evaporator away from clogging. Produce crystal clear, odor-free ice for beverage bars and catering stores.
Tea Shop Water Purification Solution
Use PP sediment + UDF carbon cartridges. Remove residual chlorine and odd tastes, deliver pure water, preserve the original aroma of tea and avoid off-flavor.
️ Restaurant Kitchen Water Purification Solution
Triple carbon combination design. Suitable for multi-point water use: dishwashers, vegetable washing sinks, soup pots. Stable high flow meets the full kitchen water demand.
Hotel Direct Drinking Water Solution
Quad housing configuration with UV sterilizer. Supply safe, stable drinking water for the whole floor, ideal for boutique hotels and serviced apartments.
Hot Pot & Soup Restaurant Solution
PP + carbon + resin softener set. Protect soup cooking equipment, reduce scale and clogging, keep the original taste of soup broth.
Standard System Combination Logic
Big Blue Filter Housing → Water Softener → Terminal Equipment (Coffee Machine / Ice Maker / Drinking Faucet) It is the standard pre-filtration chain for commercial foodservice water systems.
⚙️ Flow Matching Guide for Engineers
Single coffee machine: 1–2 T/H, single housing series setup
Coffee machine + ice maker dual equipment: 3–5 T/H, dual housing series setup, no water competition
Kitchen multi-point water (sink, dishwasher, soup pot): 6–10 T/H, triple housing parallel setup
Hotel whole-floor direct drinking: 10–15 T/H, triple / quad housing parallel setup
Support 304 stainless steel parallel bracket assembly, shared inlet & outlet manifold, easy to expand
Selection Formula
Required Flow = Peak Water Demand × 1.2 Select the number of housings in parallel according to the calculated flow. Tips: Choose matched cartridge combinations based on local water quality and application to get optimal filtration effect.
Core Filtration Functions for Different Needs
Sediment filtration: Remove sand, rust, suspended impurities
Carbon filtration: Remove chlorine, peculiar smell and organic matter
Resin softening: Reduce water hardness, prevent scale
UV sterilization: Realize safe direct drinking water
PARAMETER |

Product Lineup & Options
Available Size: BB10 / BB20
Housing Color: Blue (light-proof, anti-algae) / White (transparent window, easy dirt check)
Combination Type: Single / Dual / Triple housing
Inlet & Outlet Thread: 1" BSP / 1.5" BSP / 2" BSP
Optional Ports & Accessories: Air release valve, pressure gauge port, drain port
️ Compatible Filter Cartridges(20" Big Blue)
PP Sediment Filter: 5/10/20μm, trap sand, rust and suspended solids, for pre-filtration
UDF Granular Carbon Filter: Remove chlorine, odor, improve taste of coffee & tea
CTO Carbon Block Filter: Adsorb chlorine, odor, organic matter and color
Ion Exchange Resin Filter: Soften water, reduce hardness, prevent scale
Composite Filter (PP+Carbon+Resin): All-in-one filter for compact space
Performance Specifications
Max Working Pressure: 0.8MPa (8 bar / 116 PSI)
Burst Pressure: ≥4× working pressure
Temperature Range: Standard 5–50°C; High temperature version up to 80°C (customizable)
Recommended Flow Rate: Single housing: 3–5 T/H Triple housing (parallel): up to 15 T/H
Material: Food-grade PP housing, reinforced PP+glass fiber cap, EPDM/Silicone double O-ring
✅ Quality Control & Certifications
Factory Inspection: 100% full inspection before shipment 1.5× working pressure hold test, O-ring air tightness test, thread torque test, appearance inspection
Certifications: NSF/ANSI 42 & 53, FDA, CE, ISO9001
Compliance: GB4806 food contact standard, national water hygiene license, export compliant for global foodservice & hotel projects
Durability: ≥10,000 open/close cycling test

| WHY UMEK |
Hebei UMEK Environment Machine Co., Ltd. and Shijiazhuang Amanda Import & Export Trading Co., Ltd. are professional water treatment companies specializing in water purification equipment, components, and complete water treatment solutions. Founded in 1997, we have 29 years of experience in the water treatment industry and 17 years of export experience.

With a 13,800 m² manufacturing facility and a team of 107 employees, we combine manufacturing capabilities with technical expertise to provide reliable products and practical water treatment solutions.
Our product portfolio covers industrial RO systems, FRP tanks, automatic control valves, ion exchange resin, RO membrane housings, RO membranes, filter cartridges, filter housings, UV sterilizers, household and commercial water purification systems, portable water purification systems, cleaning carts, and customized water treatment equipment from 0.5 to 60 tons, and more.

We serve customers in more than 130 countries and regions, with international operations and resources in markets including the United States, South Africa, Nigeria, Uganda, Russia, and the Netherlands. Our products are widely used in residential, commercial, industrial, outdoor, RV, yacht, agricultural, and engineering applications.
Quality control runs throughout our supply chain, production, inspection, and delivery processes. We have a well-established supply chain and support fast product delivery with PLM, MES, WMS, SCADA, and SAP systems.
Our mission is to bring high-quality Chinese water treatment products to the world and become a trusted one-stop water treatment product and solution provider for global customers.

Factory Showcase
Factory Showcase
Factory Showcase
Factory Showcase


✅ Injection Molding
We mold the filter housing body, cap and key plastic components via precision injection molding. Strict raw material feeding control ensures the base material is food-grade PP, laying a solid foundation for stable structure and safe water contact.
✅ Testing & Inspection
Every finished housing goes through full-item quality checks, including pressure holding test, air tightness sealing test, thread torque test, appearance and functional inspection. Only qualified products move to the next stage to eliminate leakage and defect risks.
✅ Packaging & Shipment
Qualified filter housings are neatly packed, properly stored, and arranged for shipment. Standard packaging protects goods against damage during long-distance ocean and land transportation, delivering reliable products to global customers.
✨ Core Advantages of Our Manufacturing System
Standardization: Standard production flow, stable and consistent product quality batch by batch.
Full-process Quality Control: Inspection runs through the whole manufacturing workflow.
High Efficiency: Modern injection equipment and lean production shorten lead time.
Customer Satisfaction: Professional support and stable supply service for worldwide partners.
| EXHIBITIONS |

Water Tech 2023
Water Tech 2023
Water Tech 2024
Canton Fair
Canton Fair
Canton Fair
| PACKAGING & SHIPPING |

| FAQ |
Q:What pre-filter should I use for a coffee machine? Do I need a resin softener?
A:We recommend PP + CTO + scale inhibition. Resin softener is recommended if water hardness is above 120 ppm. This protects the machine and improves coffee flavor.
Q:Can multiple housings be connected in parallel?
A:Yes. Up to 3 housings can be connected in parallel to increase flow capacity and extend filter service life.
Q:Will the cap leak? How can I prevent leakage?
A:Our cap is designed with double O rings and high precision threads. Keep the O ring clean and properly seated, and do not over tighten.
Q:How often should I replace the cartridge? Do I need a special wrench? Will it affect business?
A:A4 It depends on water quality and usage typically every three to six months A housing wrench makes replacement easy Replacement takes only a few minutes and will not affect your operation
Q:Can you make a high temperature version for hot water filtration? What is the maximum temperature?
A:Yes. Standard housings work up to 45°C. High temperature models are available up to 80°C. Please confirm the model.
Q:What pre-filter do you recommend for ice machines? Will the ice be cleaner?
A:We recommend PP + CTO or scale inhibition. It reduces impurities, scale and chlorine taste, making ice clearer and safer.
Q:How can I configure a direct drinking solution for hotel rooms? How many housings are needed?
A:Typical configurations include PP + CTO + UF or CTO + T33. For higher flow demand, 2 housings in parallel are recommended.
Q:What is the difference between white and blue housing? Which one should restaurants or hotels choose?
A:There is no difference in performance. White is clean and elegant, while blue is classic and easy to identify. Both are made from food grade materials and are suitable for commercial use.