All-in-One 817 Spotless DI Water System: Mixed Bed Resin, 10" PP Pre-Filter, Pressure Gauge, Hoses, Fittings & Carry Handle – Zero-Spot Rinse for Car, RV, Boat & Motorcycle

• Step 1: Rinse the vehicle with tap water to wet the surface

  This first step is all about getting the car ready for cleaning.

  Use a regular garden hose with tap water to spray the entire car, starting from the roof and working down to the wheels. The goal is to wet the paint completely and wash away loose dirt, dust, and small debris. This prevents you from rubbing grit into the paint later, which can cause scratches. Make sure every part of the car, including the wheel wells and lower panels, gets fully wet.

• Step 2: Apply the cleaning solution onto the sponge and wipe it onto the car

  Now it’s time to clean the car with soap.

  Mix your car wash solution with water in a bucket, then soak a soft sponge or wash mitt in the soapy water. Gently wipe the car from top to bottom, using straight, light motions. The soap will break down road grime, bugs, and dirt that the first rinse didn’t remove. Always keep the sponge wet and rinse it often in the bucket to avoid picking up dirt that could scratch the paint.

• Step 3: Rinse off the soap suds using tap water

  After washing, you need to get all the soap off the car.

  Use your garden hose again with tap water to rinse the entire vehicle, still working from top to bottom. Make sure every trace of soap suds is washed away, including from door handles, window trim, and crevices. If soap is left on the car, it can dry and leave streaks before the final rinse. This step leaves the car clean but still wet and ready for the spotless finish.

• Step 4: Use a water deionizer to rinse the vehicle, leaving a spotless finish

  This is the key step for a spot-free shine, using your water deionizer.

  Connect your water deionizer to the hose, then rinse the entire car slowly with the deionized water, starting from the roof and letting the water run down. Since deionized water has no minerals, it won’t leave water spots when it dries. You don’t even need to towel dry the car—just let it air dry naturally, and you’ll get a crystal-clear, spotless finish.

• Pre-Filtered Design to Extend Resin Life

  Unlike basic DI systems that skip pre-filtration, our kit includes a 10" blue filter housing with a PP sediment filter to trap dirt, rust, and debris before water reaches the mixed bed resin. This prevents resin fouling, doubling the lifespan of your expensive resin and saving you money on frequent replacements.

• 0 TDS Spot-Free Rinse Guaranteed

  Premium mixed bed ion exchange resin removes 100% of dissolved minerals (calcium, magnesium, iron) from tap water, delivering pure 0 TDS water. Wash and rinse your car, RV, boat, or windows and let it air dry completely—no wiping, no streaks, no water spots, even in the hardest water regions.

• Durable 817 FRP Tank with Safety & Convenience

  Built with an industry-standard 8x17 NSF-certified FRP tank rated for 100 PSI, this system includes a precision pressure gauge to monitor water pressure and prevent overloading. The heavy-duty stainless steel carrying handle makes it easy to move between jobs or store in your garage.

• Universal Compatibility & Complete Kit

  Comes with 3/4" brass garden hose fittings, a shut-off valve, and a flexible connection hose, compatible with standard outdoor faucets in the US and Canada. Every installation accessory is included—no extra parts or tools required for setup.

• Multi-Purpose Cleaning for All Surfaces

  Gentle yet effective for car detailing, RV/boat maintenance, motorcycle washing, window cleaning, solar panel rinsing, and more. Safe for ceramic coatings, clear bras, gel coats, and glass, preventing mineral deposits that cause etching and dulling over time.

• One-stop Ready To Use Solution

  Whole machine integrated pre-assembled, no complicated on-site installation. Unpack and start working directly.
• Customization Acceptable

  We support customized flow rate, voltage (110V/220V for different countries), plug standard, pipeline interface, logo print.
• Global After-sales Support

  Complete operation manual, video installation & maintenance guidance, long-term supply of matching consumables (Filter cartridge, filter bottle, RO membrane, membrane housing, etc.).
• Stable Bulk Supply For Wholesalers & Distributors

  Stable production capacity, support MOQ wholesale, OEM & ODM cooperation for global agents and distributors.

With 29 years in water treatment and 17 years of international market experience, UMEK delivers one-stop solutions trusted in over 120 countries for efficient and reliable results. As the largest industrial water treatment wholesaler in the north, backed by 30+ professionals and a unique culture of mentorship and excellence, we are committed to providing high-quality products and customized services.

We partner with top-tier suppliers like Runxin Valve and Pentair, ensuring certified products with strict quality control. UMEK also offers a value-driven environment, comprehensive training, and growth opportunities, empowering employees and achieving mutual success. Choose UMEK – your partner in expertise, innovation, and sustainable development!

Sample Room

Water Tech 2023

Water Tech 2023

Water Tech 2024

Canton Fair

Canton Fair

Canton Fair

A1. Why choose UMEK for industrial water treatment solutions?

Q: With 29+ years in water treatment and 17+ years of global expertise, UMEK combines innovation, certified quality, and tailored services. As the largest wholesaler in the north, we deliver trusted solutions across 120+ countries, backed by 30+ professionals and partnerships with industry leaders like Runxin Valve and Pentair.

A2. Are UMEK products certified for international standards?

Q: Yes. All products undergo strict quality control and comply with global certifications (e.g., ISO, CE, WRAS). Our partnerships with top-tier suppliers ensure reliability and performance in diverse industrial applications.

A3. Can UMEK provide customized water treatment solutions?

Q: Absolutely. We specialize in tailored services, designing systems to meet unique client needs. Our team collaborates closely with you to ensure optimal efficiency, cost savings, and compliance.

A4. How does UMEK ensure product quality?

Q: Every product is rigorously inspected, tested, and certified. We work exclusively with vetted suppliers like Runxin Valve and Pentair, adhering to international quality benchmarks at every production stage.

A5. What industries does UMEK serve internationally?

Q: We serve 120+ countries across sectors like manufacturing, energy, municipal water, and agriculture. Our solutions adapt to regional regulations, climates, and operational demands for seamless global delivery.

A6. Does UMEK prioritize sustainability in its solutions?

Q: Yes. Sustainability drives our innovation. We optimize water reuse, reduce chemical waste, and integrate energy-efficient technologies to support clients’ environmental and ESG goals.

A7. What post-purchase support does UMEK offer?

Q: Clients receive lifelong technical support, including system maintenance guidance, troubleshooting, and employee training. Our mentorship-driven team ensures your operational success long after installation